Misting Fittings, Push-in Misting Fittings, Push to Connect Misiting Fittings

Advantages:
1) Tubing could be installed and uninstalled easily without hurting tubing.
2) Proof Pressure is 490psi (3.5Mpa)
In the video, we used a nozzle with 0.5mm hole, pressure at 250psi (1.8Mpa) for testing.
3/8" to 3/8" Push to Connect Fitting Union Straight

PU 3/8 - 3/8" push to connect fitting union straight is used to connect two tubes of 3/8" O.D in the same direction. Release collar and Lock-claw built in the 3/8" push to connect fitting union straight allow easy connection and disconnection 3/8" tubing without using tools and causing damage to the tube.
Push-in Tubing O.D: 3/8"
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
For more information, please go to https://www.wellfittings.com/composite-push-in-fittings-for-metric-inch-tubing-pt-r-bspt-connection-thread/pu-union-straight/pu-3-8-3-8-o-d-tube-union-straight-push-to-connect-fitting.html
M7 Thread Male Connector Push in Fitting, Push to Connect Fitting

M7 thread male connector push in fitting, push to connect fitting from Pneuflex could match 4mm, 6mm, 8mm, 10mm, 5/32", 1/4", 5/16", 3/8" O.D size tubing.
M7 Thread Male Elbow Push in Fittings, Push to Connect Fitting

M7 thread male elbow push in fitting from Pneuflex can match 4mm, 6mm, 8mm, 10mm, 5/32", 1/4", 5/16", 3/8" O.D size tubing.
Plastic Tubing Cutter and Metal Tubing Cutter from Pneuflex

Tubing Cutter from Pneuflex. Made from PC plastic and Metal. Fast and smooth cutting.
Porous Polyethylene (HDPE) Filter / Silencer - PSE

Pneuflex is also making Porous Polyethylene (HDPE) Filter / Silencer. The filter size is ranging from 10-60μm.
PSE - Porous HDPE filter has the advantages of light weight and high accurate filter size.
https://www.wellfittings.com/pneumatic-mufflers-silencers-filters/pse-porous-plastic-silencer/
316L Inox Push in Fittings from Pneuflex

Pneuflex designed and promoted high quality 316L stainless steel pneumatic tube fittings for customers. FDA certificted so can be used for food equipments. Using viton O-ring inside of the 316L inox push in fittings for sealing.
Easy installation and disconnection without any tools: pushing the tubing into fittings to be gripped to connect the Pneuflex tubings. When removing tube tubings, pressing the release sleeve and pulling the tubings out of the fitting.
Standard Sintered Stainless Steel Silencer

Standard sintered stainless steel silencer is made of stainless steel and stainless steel powder. The standard sintered stainless steel silencer is resistant to atmospheric corrosion, foodstuffs, sterilizing solutions, many organic chemicals, dyestuffs and a wide variety of inorganic chemicals. Standard sintered stainless steel silencer is used in exhaust ports or any port that is open to atmoshphere to help keep out forein particles. External tightening with a flat wrench or socket wrench.
Advantage:
1. To reduce noise effectively in pneumatic system or air discharge equipment.
2. Allow the airflow to pass through and prevent or reduce the sound transmission.
3. Easy clean and hardly to wear out with abrasion resistance and anti-strong impact resistance.
For more details, please refer to https://www.pneuflex-fittings.com/
Stainless Steel Transition Fittings

Pneuflex 's 316 stainless steel transition fittings are used to connect soft nylon, polyurethane, polyethylene or Teflon tubing one one end and metal tubing on other end. The soft tubing connection end is stainless steel push to connect fitting configuration, and the metal tubing connection is double ferrules stainless steel compression tube fitting configuration. Both push to connect fitting end and compression tube fitting end are made of 316 stainless steel. Stainless steel transition fittings are suitable for use with air, water, oil and steam in high temperature and wash-down applications. Accommodate metric tubing O.D ranging from 4 mm to 16 mm, inch tubing O.D ranging from 1/8" to 1/2".
STPC union straight stainless steel transition fittings are designed to connect sot tubing on one side and metal tubing on other side in the same direction. Detail information, please refer to https://www.pneuflex-pneumatic.com/stainless-steel-transition-fittings/stpc-union-straight/
316L Stainless Steel Push in Fittings

Presently, Pneuflex is the only one manufacturer in China that can make 316L stainless steel push in fittings
For more details, pls refer to https://www.pneuflexeu.com/pneumatic-products/316l-stainless-steel-push-to-connect-fittings-pt-r-bspt-thread/